This document outlines how to install Tailscale on a Windows-based Roon Server machine and configure it for accessing ARC on a phone outside the home network.

STEP ONE

Install Tailscale on Windows

If you’re new to Tailscale, you’ll first need to create a free Tailscale account.

On your Windows machine running RoonServer, go to the Tailscale website and download the Windows .exe installer.

STEP TWO

Install Tailscale on iOS/Android

On your phone, download the Tailscale app and install it.

      iOS: https://tailscale.com/download/ios

      Android: https://tailscale.com/download/android

Test Tailscale

1. Restart RoonServer and ARC on your Windows machine and your phone.

1. Turn off WIFi, leaving only the cellular data connection. Open the settings page in ARC and look for “Connected” to see if ARC is working.

2. If not connected, go into Roon and disable port forwarding. Go to → Settings → Roon ARC and enter “0” in the box for “Port”. If successfully disabled, you should see “Not Ready”
   
   
   
   

1. Some networks have port ranges reserved. If 0 or another number is not accepted as input in the “Port” box, try a few different numbers until the “Not Ready” status displays. 

Note: If you haven’t performed your initial library sync with ARC, we recommend syncing for the first time using a WiFi connection. Next, turn on cellular data only (disable WiFi) and test the Tailscale connection.

STEP FOUR: FURTHER RESOURCES 

If you’re still having difficulty using ARC with Tailscale, please post on Roon Community in the #tinkering category, where users are accumulating Tailscale/ARC expertise. 

We recommend engaging Tailscale support directly - they offer robust and responsive support and are better equipped to troubleshoot within the Tailscale app itself than Roon support. Please see their Support page here to reach their team.